Chevrolet Cruze key fob battery

Flip key

1. Swing the key blade open first. On most flip keys the cell lives in the body behind the hinge.
2. Some flip keys have a screw on the back; others just clip. Remove the screw if there is one, then pry gently at the seam.
3. Swap the coin cell, keeping the same face up as the one you removed, and do not bend the metal contact tab.
4. Clip the body closed, fold the blade, and test the buttons from a few steps away.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.

Smart key (push-button start)

1. Most push-button fobs hide a metal backup key. Press or slide its catch and draw the key out first.
2. Use the slot where the metal key sat. Twist, do not lever hard, and work along the seam until the halves separate.
3. Pop the old battery out with a toothpick or plastic pick, not a metal blade, and seat the new one with the + side matching the old one.
4. Snap the halves back together, slide the metal key home, and press each button, then try the start button from the driver's seat.

On many recent GM smart remotes a button on the side releases the key; the slot at the bottom is where the case opens.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.