Chevrolet Impala key fob battery
Every model year listed for the Chevrolet Impala has a proven battery. The most common answer is CR2032. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.
- 2000Remote (separate)
CR2032
Owner's manual: carmanualsonline.info (checked Nov 1, 2026)
Manual text: “use type CR2032 battery or equivalent”
Find CR2032 on Amazon - 2001-2005Remote (separate)
CR2032
FCC ID KOBLEAR1XTTwo sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2006-2013Remote (separate)
CR2032
FCC ID OUC60270 / OUC60221Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2014-2016Flip key
CR2032
FCC ID KR55WK50073Two sites agree: uhs-hardware.com and energizer.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2014-2019Flip key
CR2032
FCC ID OHT01060512Two sites agree: uhs-hardware.com and energizer.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2014-2019Flip key
CR2032
FCC ID OHT05918179Two sites agree: uhs-hardware.com and energizer.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2017Flip key
Not confirmed yet
- 2020Remote (manual says RKE transmitter)
CR2032
Owner's manual: carmanualsonline.info and energizer.com (checked Nov 1, 2026)
Manual text: “Replace with a CR2032 or equivalent battery.”
Find CR2032 on Amazon
Changing the battery
Separate remote fob
- The remote is a small standalone unit. You will not need to touch the ignition key at all.
- Find the slot along the edge and turn a coin in it. Go slowly so the clips do not snap.
- Lift the old coin cell out and press the new one in with matching orientation.
- Snap the case shut and watch for the lights to flash when you press lock at the car.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Flip key
- Open the flip blade. Never force the hinge sideways, since the spring and pin are the weak part of a flip key.
- Find the seam or small slot on the body (often at the end away from the blade) and twist a coin or small flat screwdriver in it until the cover lifts.
- Swap the coin cell, keeping the same face up as the one you removed, and do not bend the metal contact tab.
- Press the halves together until no gap shows, then try every button.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Coin cells are a choking and burn hazard for children. Store the spares in their original pack, out of reach.