Honda Insight key fob battery
13 of the 16 model years listed for the Honda Insight have a proven battery. The most common answer is CR1616. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.
- 2000-2006Remote (separate)
CR2025
FCC ID A269ZUA101Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 2, 2026)
Find CR2025 on Amazon - 2010-2013Key-head remote
CR1616
FCC ID MLBHLIK-1TTwo sites agree: americankeysupply.com and uhs-hardware.com (checked Nov 2, 2026)
Find CR1616 on Amazon - 2014Key-head remote
CR1616
Two sites agree: uhs-hardware.com and locksmithkeyless.com (checked Nov 2, 2026)
Find CR1616 on Amazon - 2019Smart key
CR2032
Owner's manual: manua.ls (checked Nov 1, 2026)
Manual text: “Battery type: CR2032”
Find CR2032 on Amazon - 2020-2022Smart key
Not confirmed yet
Changing the battery
Separate remote fob
- This remote is its own fob, separate from the metal key, which makes it one of the easier ones to open.
- Turn it over: some older fobs use one small screw, newer ones just clip. Pry at the seam once any screw is out.
- Lift the old coin cell out and press the new one in with matching orientation.
- Reassemble and test from a short distance.
A CR2025 is 20 mm across and 2.5 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Key with remote in the head
- This type has the buttons built into the key head. The cell is inside that head, between two clipped halves.
- Work a thin flat tool into the seam near the blade and twist; go round slowly if it does not open at once.
- Inside you may find a small circuit board in a tray. Lift the board out if the cell is underneath, swap the cell with the same side up, and refit the board.
- Close the head, check there is no gap, and try the buttons.
A CR1616 is 16 mm across and 1.6 mm thick. It is easy to confuse with the 20 mm CR20xx sizes, which will not fit.
Smart key (push-button start)
- Find the small release on the edge or back of the fob and hold it while you pull out the metal emergency key.
- Look inside the empty key slot for a notch. Put the tip of the metal key or a small flat screwdriver wrapped in tape there and twist gently until the shell splits.
- Before you take the old cell out, look at its face. Put the new cell in with the same side showing, and avoid touching both faces at once.
- Reassemble, refit the emergency key, and check that the car sees the fob when you press start.
Honda smart keys typically have a release lever for the built-in key. Twist a coin or the key tip in the slot it exposes to split the case.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Coin cells are a choking and burn hazard for children. Store the spares in their original pack, out of reach.