carfobbattery

Kia Sedona key fob battery

10 of the 20 model years listed for the Kia Sedona have a proven battery. The most common answer is CR2032. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.

  1. 2002Unknown

    Not confirmed yet

  2. 2003-2004Remote (separate)

    CR2032

    FCC ID PLNBONTEC-T009

    Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)

    Find CR2032 on Amazon
  3. 2005Remote (separate)

    CR2032

    FCC ID PLNBONTEC-T009

    Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)

    Find CR2032 on Amazon
  4. 2006-2008Unknown

    Not confirmed yet

  5. 2009-2013Remote (separate)

    Not confirmed yet

  6. 2014Remote (separate)

    Not confirmed yet

  7. 2015-2018Flip key

    CR2032

    FCC ID TQ8-RKE-4F19

    Two sites agree: uhs-hardware.com and americankeysupply.com (checked Nov 1, 2026)

    Find CR2032 on Amazon
  8. 2015-2018Smart key

    CR2032

    FCC ID SY5YPFGE04

    Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)

    Find CR2032 on Amazon
  9. 2018-2021Smart key

    CR2032

    FCC ID SY5YPFGE06

    Two sites agree: uhs-hardware.com and americankeysupply.com (checked Nov 1, 2026)

    Find CR2032 on Amazon
  10. 2019-2021Flip key

    CR2032

    FCC ID TQ8-RKE-4F19

    Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)

    Find CR2032 on Amazon

Changing the battery

Separate remote fob

  1. A separate fob has no key blade inside, so it opens with nothing but a coin or a small screwdriver.
  2. Find the slot along the edge and turn a coin in it. Go slowly so the clips do not snap.
  3. Replace the cell, keeping the + side where it was, and check the small metal tab still touches it.
  4. Reassemble and test from a short distance.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.

Flip key

  1. Fold the blade out so it is out of the way, or keep it folded if your case opens from the side; the battery sits in the plastic body, not the blade.
  2. Find the seam or small slot on the body (often at the end away from the blade) and twist a coin or small flat screwdriver in it until the cover lifts.
  3. Lift the cell out with a plastic tool and press in the new one with the + side matching.
  4. Clip the body closed, fold the blade, and test the buttons from a few steps away.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.

Smart key (push-button start)

  1. Most push-button fobs hide a metal backup key. Press or slide its catch and draw the key out first.
  2. Use the slot where the metal key sat. Twist, do not lever hard, and work along the seam until the halves separate.
  3. Pop the old battery out with a toothpick or plastic pick, not a metal blade, and seat the new one with the + side matching the old one.
  4. Reassemble, refit the emergency key, and check that the car sees the fob when you press start.

Kia smart keys usually free the mechanical key with a button, and the case opens at the gap it leaves.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.

Coin cells are a choking and burn hazard for children. Store the spares in their original pack, out of reach.

Other Kia models